Fully meets building regulations for whole house ventilation standards
Ebac’s Mechanical Ventilation with Heat Recovery (MVHR)
Patented Smart Control Technology
Low maintenance, whole house solution
Energy efficient heat recovery
Easily maintain your indoor climate
Whole house installation
High Capacity
Can remove up to 3 litres of moisture per day
Laundry Drying
Damp air is quickly expelled, speeding up natural drying by 30%
Better suited to New Build homes
To meet building regulations whole house ducting is required
More Effective
Fast and permanent solution to condensation, damp & mould
Summer Cooling
Replace warm internal air with cooler outdoor air, filtered for pollution and pollen
No water emptying
All moisture is vented externally. No need to empty a water container
No condensation
Removes up to 3 litres of moisture per day at UK conditions
CO2 & Radon Expulsion
Removes CO2, Radon and other household contaminants
Less pollution and pollen
G4 filters remove large particle pollution dust and pollen
House odours
Odours from cooking, pets are vented and replaced with fresh air
Low Running Costs
Up to 25% lower running costs compared to PIV systems
Advantages of the MVHR
88% heat exchanger efficiency minimising heat loss and Saving money on your heating bill
Artificial intelligence SMART control optimises air flow to remove the correct level of moisture, Significantly reducing running costs
Integrated CO2, humidity & temperature sensors
Intuitive 3.5” touchscreen controller
Super Efficient EC fan motors
G4 90% supply & extract filters
Fresh, Filtered air during the summer months thanks to the Automatic Summer Bypass
Integrated automatic frost protection
22mm condensation drain
32mm thermal and acoustic insulation
Silent hours timer
Left or right-hand spigot configurations
Wall-mounted or free standing
Characteristics of MVHR
SEC Class
| Model | SEC Class |
| VA32 | A+ |
SAP (2012) PCDB Performance
| Exhaust Terminal Configuration | Specific Fan Power (W/(l/s)) | Heat Recovery Percentage (%) |
| Kitchen + 1 Wet Room/s | 0.74 | 88 |
| Kitchen + 2 Wet Room/s | 0.81 | 87 |
| Kitchen + 3 Wet Room/s | 0.93 | 86 |
| Kitchen + 4 Wet Room/s | 1.14 | 84 |
| Kitchen + 5 Wet Room/s | 1.38 | 84 |
Sound Data
| Ventilation Capacity (m3/h) | Static Pressure (Pa) | Housing Emission dB (A) | Duct “from dwelling” dB (A) | Duct “to dwelling” dB (A) |
| 167 | 50 | 62.3 | 51.4 | 62.3 |
Ventilation Capacity at 100Pa (m³/h) | 242 |
Rated power at 70% of max (W) | 47.4 |
Weight (kg) | 35 |
Spigot diameter | 125mm |
Temperature Efficiency (%) | 91 |
Summer Bypass | 100% Filtered |
Humidity Sensors | Yes |
CO2 Sensor | Yes |
Controller | 3.5 Touchscreen |
User Modes | Normal, Boost, SMART |
Warranty | 2 Years Parts & Labour |
Product Code | VA32 |
Housing Material | Galvanised Steel |
Wall mounting | Yes |
Floor mounting | Yes |
Spigot Connection | Top Only |
Power consumption according to BS EN 13131-7 : 2021 @ Reference flow rate | 0.043kW |
Frost protection | Yes |
Filter class | EU 4 (G4) |
Flow rate high at 100 Pa (m³/h) | 242 |
Flow rate high at 150 Pa (m³/h) | 225 |
Flow rate high at 200 Pa (m³/h) | 210 |
Plug | No Plug Supplied |
Wireless control | No |
Digital display | Yes |
Zone control | 1 Zone |
Touchscreen Controller
Two 240V custom inputs for remote switch to adjust user mode
Live sensor readouts for the internal Temperature, CO2 & RH and external Temperature & RH
Comissioning Menu
Summer Boost & Silent Hours timer
Indoor Air Quality (IAQ) live status indicator
Mode control - Normal, Boost & SMART
Fault code display & diagnosis
Service indicator